SAE AMS5221 Iron-Nickel Alloy Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated
作者:标准资料网 时间:2024-05-22 11:19:07 浏览:8506
来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AMS5221
Title:Iron-Nickel Alloy Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope: This specification covers an iron-nickel alloy in the form of strip.This strip has been used typically for diaphragms, leaf springs, and helical springs, requiring a precipitation-hardenable alloy with a coefficient of modulus of elasticity of -20 to +20 x 10-6 per degree Fahrenheit from -50 to +150 degrees F (-36 to +36 x 10-6 per degree Celsius from -46 to +66 degrees C) after suitable heat treatment, but usage is not limited to such applications.
Rationale: This specification covers an iron-nickel alloy in the form of strip.This strip has been used typically for diaphragms, leaf springs, and helical springs, requiring a precipitation-hardenable alloy with a coefficient of modulus of elasticity of -20 to +20 x 10-6 per degree Fahrenheit from -50 to +150 degrees F (-36 to +36 x 10-6 per degree Celsius from -46 to +66 degrees C) after suitable heat treatment, but usage is not limited to such applications.
Title:Iron-Nickel Alloy Strip, 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al, Solution Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope: This specification covers an iron-nickel alloy in the form of strip.This strip has been used typically for diaphragms, leaf springs, and helical springs, requiring a precipitation-hardenable alloy with a coefficient of modulus of elasticity of -20 to +20 x 10-6 per degree Fahrenheit from -50 to +150 degrees F (-36 to +36 x 10-6 per degree Celsius from -46 to +66 degrees C) after suitable heat treatment, but usage is not limited to such applications.
Rationale: This specification covers an iron-nickel alloy in the form of strip.This strip has been used typically for diaphragms, leaf springs, and helical springs, requiring a precipitation-hardenable alloy with a coefficient of modulus of elasticity of -20 to +20 x 10-6 per degree Fahrenheit from -50 to +150 degrees F (-36 to +36 x 10-6 per degree Celsius from -46 to +66 degrees C) after suitable heat treatment, but usage is not limited to such applications.
下载地址: 点击此处下载
